"Learn How To Flash An Official Firmware For Samsung Devices"
Well guyz i am posting this article because I am giving links and posting official firmwares but some one don't know how to flash an official firmware for a Samsung Device. so lets see the tutorial.
1. Drivers Setup
Well for connecting any device to PC it is must to first install its drivers for the device than connect that. so for Samsung Devices you should install these both.
2. Odin
This is a software through which we can flash a custom .tar etc files. Now it is must to have this software on PC
a. Odin (second link if first didnt work) All versions all available in folder.
3. Flashing A Firmware
To flash an official firmware for Samsung Device. first you should put your phone in download mode. By pressingVolume Down + Power Button + Home Button at the same time for some time when the Warning! screen appears. then leave them and press Volume Up button so download mode starts. as shown in image.
[the first Warning!] [After pressing Volume Up button]
When the second screen appears so connect your phone/tablet to PC. and then Open Odin tool. any version. as shown in image
[ this is a 3.4 version of odin you can try any one ]
When you connect your phone so there will be a message shown in message box i.e <ID:0/010> Added so it means that your phone is connected properly if Added not shown so try it again, then check on PDA check box and click PDA button and pick up that firmware file which is .tar/.md5 etc and wait if it was checking it. then click Start. the progress will be done and your phone will be restarted several times during flashing. after completion Pass message will be shown in above boxes. thats it.
Post a Comment Blogger Facebook